TY - JOUR A1 - Khasanov, Bakhrom AV - none UR - https://mjstjournal.com/index.php/mjst/article/view/7459 Y1 - 2026/05/19/ KW - Portland cement KW - aerated concrete KW - carbonate waste KW - density KW - specific surface area KW - compressive strength. ID - arxiv66906 JF - Multidisciplinary Journal of Science and Technology PB - Center for Tech and Media Research N2 - The increase in the volume of housing construction requires the development, creation and study of highly efficient thermal insulation materials. In modern construction, various types of aerated concrete are included in such construction materials. With the increase in the height of buildings, the reduction of the mass of the structure becomes more relevant. It is known that the thermal conductivity of a wall built of aerated concrete with a density of 1200 kg/m3 is 4 times higher than the thermal conductivity of a wall built of aerated concrete based on carbonate waste. Accordingly, when comparing walls with the same thermal insulation capacity, we see that the thickness of a wall built of limestone is 4 times greater than that of aerated concrete. Our research is aimed at obtaining autoclave-free aerated concrete based on carbonate waste, one of the types of aerated concrete - aerated concrete. The conducted studies have determined that by using the fine filler generated as waste during the cutting of masonry stones from oyster limestone, autoclave-free aerated concrete is obtained, the physical and mechanical properties of which comply with regulatory requirements. By using carbonate waste, aerated concrete products with an average density of 500 kg/m3 and a strength of up to 2.5 MPa are obtained, which corresponds to D500 in and B2 in strength class. The use of carbonate waste and a decrease in cement consumption ensure a 30% reduction in the cost of aerated concrete. TI - DEVELOPMENT OF SUSTAINABLE AERATED CONCRETE WITH ENHANCED ENERGY-SAVING PROPERTIES N1 - Imported from MJST Journal (OAI id oai:ojs.pkp.sfu.ca:article/7459) ER -